![[AISI LOGO]](https://www.steel.org/wp-content/themes/steel-org/assets/images/steel-logo.png){kind=logo}
American
Iron and Steel
Institute
2022 GDIS Presentations
2022 GDIS Presentations
2022 Honda Civic (North American Car of the Year)
Track 1 – Session 1 – Jill Fuel, Honda Development and Manufacture of America
All New Nissan Rogue
Track 1 – Session 2 – Jason Lyman and Weston Lawson, Nissan
Steel E-Motive: Steel Vehicle Structures for Autonomous MaaS
Weldability Investigation of 3rd Gen AHSS for Automotive Manufacturing
Track 1 – Session 4 – Kate Namola, Toyota North America
A Primer on Sustainability and the Role of Steel
Track 1 – Session 5 – Brandie Sebastian, American Iron and Steel Institute
New Solutions for Light Duty Frame, Battery Electric Vehicles and Welding AHSS
Track 1 – Session 6 – Isaac Luther, TWB
Cost Effective, Flexible, Scalable HV Battery Enclosure Solutions
Track 1 – Session 7 – Juan Armendariz, KATCON
Novel Instability Framework to Predict Local Formability in 3rd Gen AHSS B-Pillar Technology Demonstrator
Track 1 – Session 8 – Jacqueline Noder, PhD, University of Waterloo
Evolving the Steel Strength Ductility Diagram: Temperature and Rate Effects on New AHSS
Track 1 – Session 9 – Jun Hu, PhD, Cleveland-Cliffs
Multi-Level Material Cards for Sheet Metal Forming Simulations
Track 1 – Session 10 – Dr. Eren Billur, Billur Metal Form
Additive Manufactured Insert Performance in Stamping of DP980 Steel
Track 1 – Session 11 – Paul Wolcott, General Motors Company on behalf of A/SP
Evaluation of LME Cracking Severity in Homogeneous and Heterogeneous Joints of 3rd Gen AHSS
Track 2 – Session 1 – Kevin Teng, General Motors Company on behalf of A/SP
Characterization of Mechanical Properties and Failure Behavior of 3rd Gen AHSS Spot Welds Under Combined Loading Mode
Track 2 – Session 2 – Mohammad Shojaee, University of Waterloo on behalf of A/SP
MPI (Multi Part Integration) Concepts Using Press Hardened Steel Laser Welded Blanks
Track 2 – Session 3 – Nachiket Gokhale, ArcelorMittal, Tailor Welded Blanks Americas
A Technique to Measure the Local Mechanical Properties of 3rd Gen AHSS Resistance Spot Welds
Track 2 – Session 4 – AbdelBaset Midawi, University of Waterloo on behalf of A/SP
Innovative Joining of Functional Elements in PHS During Hot Forming
Track 2 – Session 5 – Dr. Amer Mahlme, PROFIL
Insights from Measuring the Press Tonnage of 3rd Gen AHSS Stampings
Track 2 – Session 6 – Vince Millioto, Martinrea International on behalf of A/SP
Characterization of 3rd Gen AHSS Towards Reliable Forming and Springback
Track 2 – Session 7 – Kidambi Kannan, AutoForm Engineering USA
Integrated Process and Performance Models for RSW of 1st and 3rd Gen Steels
Track 2 – Session 8 – Fernando Okigami, The Ohio State University on behalf of A/SP
Alternative Joining A/SP Research Results of Quasi-Static Evaluation
Track 2 – Session 9 – Bryan Macek, FCA USA LLC on behalf of A/SP
Laser Heat Treating on Form, Trim and Hot Stamping Dies
Track 2 – Session 10 – Aravind Jonnalagadda and Nitin Kumar, Synergy Additive Manufacturing
Smart Factory – Roll Forming 4.0
Track 3 – Session 1 – Dr. Tilman Traub, Dreistern GmbH & Co. KG
Maximizing Lightweighting in Steel Automotive Bodies and Frames with Steel Tube Air Forming (STAF) Process
Track 3 – Session 2 – Ryuichi Funada, Sumitomo Heavy Industries
Application of New Cold Forming Flexible Rolled AHSS
Track 3 – Session 3 – Markus Zoernack, Mubea Tailor Rolled Blanks
Formability Evaluations of AHSS Laser-Welded Blank
Track 3 – Session 4 – Hyunok Kim, EWI on behalf of A/SP
Advanced Joining Techniques in Collision Repair
Track 3 – Session 5 – Scott VanHulle, I-CAR
Sustainable Lightweight Battery Enclosure Design with Multiple AHSS Steels
Track 3 – Session 6 – Sajan George Elengikal, Cleveland-Cliffs
Laser Welded Coating Free Press Hardened Steel
Track 3 – Session 7 – Sarah Tedesco, General Motors Company
Laser Welding of 2000 MPa Press Hardened Steel
Track 3 – Session 8 – Marc Auger, Coherent and Eduardo Zuniga, Ford Motor Company
Sustainability Assessment of Steel vs. Aluminum Bumper Beam
Track 3 – Session 9 – Stuart Brown on behalf of the AISI Bumper Team
In-Situ Failure Analysis and Meso-Scale Damage Modeling of Spot Weld Failure: Pullout vs. Interfacial
Track 3 – Session 10 – Alireza Mohamadizadeh, University of Waterloo
Advanced Laser Hardening Technology for Tools and Die Steels
Track 3 – Session 11 – Brandyn Jay, Fraunhofer USA on behalf of A/SP